• 双向测量原理不受压力、密度、温度和粘度的限制

• 完全适用于水和污水行业的标准测量场合

仪表特性

• 传感器重量*多可减轻 30 %

• 公称直径：DN 25 ～ 2400 (1～ 90")

• 安装开档尺寸缩短，符合DVGW/ISO标准

• 两行显示，按键操作

• 一体化型或分离型

• HART

特征和规格

测量原理电磁开关产品标题The flowmeter with a weight-optimized sensor and high cost-effectiveness. Fully suitable for standard applications in the water and wastewater industry.
传感器特点Reduced installation costs – flexible mounting by one‐of‐a‐kind lap‐joint flange concept (DN <350/14"). Energy‐saving flow measurement – no pressure loss due to cross‐section constriction. Maintenance‐free – no moving parts. Up to 30 % less sensor weight. Nominal diameter: DN 25 to 2400 (1 to 90").
变送器特点Cost-effective – designed for easy applications and direct integration. Safe operation – display provides easily readable process information. Fully industry compliant – IEC/EN/NAMUR. 2-line display with push buttons. Device as compact or remote version.
公称口径范围Lap joint flange; lap joint flange, stamped plate: DN 25 to 300 (1 to 12") 
Fixed flange: DN 350 to 2400 (14 to 90")
接液部件材质Liner: PTFE; Polyurethane; Hard rubber 
Electrodes: 1.4435 (316L); Alloy C22, 2.4602 (UNS N06022)
测量变量Volume flow
*大测量误差Volume flow: ±0.5 % o.r. ± 2 mm/s (±0.5 % o.r. ± 0.08 in/s)
测量范围9 dm³/min to 162 000 m³/h (2.5 gal/min to 1030 Mgal/d)
*大过程压力PN 16, Class 150
介质温度范围Liner material hard rubber: 0 to +80 °C (+32 to +176 °F) 
Liner material polyurethane: –20 to +50 °C (–4 to +122 °F) 
Liner material PTFE: –20 to +90 °C (–4 to +194 °F)
环境温度范围Flange material carbon steel: –10 to +60 °C (+14 to +140 °F) 
Flange material stainless steel: –40 to +60 °C (–40 to +140 °F)
传感器外壳材质DN 25 to 300 (1 to 12"): AlSi10Mg, coated 
DN 350 to 2400 (14 to 90"): Carbon steel with protective varnish 
Sensor connection housing: AlSi10Mg, coated
变送器外壳材质Powder‐coated die‐cast aluminum
防护等级Compact version: IP66/67, type 4X enclosure 
Sensor remote version (standard): IP66/67, type 4X enclosure 
Sensor remote version (option): IP68, type 6P enclosure 
Transmitter remote version: IP67, type 4X enclosure
显示/操作2-line display with push buttons 
Configuration via local display and operating tools possible
输出4‐20 mA HART (active)
Pulse/switch output (passive)
输入None
数字式通信HART
电源DC 11 to 40 V 
AC 85 to 250 V (45 to 65 Hz) 
AC 20 to 28 V (45 to 65 Hz) 

危险区认证cCSAus
产品安全性CE, C-tick
计量认证和证书Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
卫生型认证和证书Drinking water approval: ACS, KTW/W270, NSF 61, WRAS BS 6920