91社区视频,国产一二区视频,一级做人爰片全过

Photoelectric sensors

G2S, Through-beam photoelectric sensor

Type

GSE2S-N1311

Part No.

1064365

At a glance

Sensing range up to 2 m

Rugged metal mounting bushes ensure reliable installation and a long service life

PinPoint LED technology is precise and fast-reacting for optimal, quick detection of a wide range of objects

Clearly visible LED display

Your benefits

Easy alignment thanks to the small, brilliant and highly visible light spot

High throughput and less machine and system downtime, since the sensors are pre-set and have high operating reserves

Very high sensing ranges with high reserve factors, since the powerful PinPoint LED detects objects at distances due to a high light intensity

The 45-degree tilted cable entry offers maximum installation flexibility with additional soft rubber bearings to absorb vibrations and tensile loads

Installation flexibility since several sensors can be installed in close proximity to one another without causing false trips due to interference

Features
	Sensor/detection principle:	Through-beam photoelectric sensor
	Dimensions (W x H x D):	7.7 mm x 21.8 mm x 13.5 mm
	Housing design (light emission):	Rectangular
	Sensing range max.:	0 m ... 2 m
	Sensing range:	0 m ... 1.5 m
	Type of light:	Visible red light
	Light source:	PinPoint LED ¹⁾
	Wave length:	640 nm
	Light spot size (distance):	Ø 23 mm (500 mm)

¹⁾ Average service life of 100,000 h at T_A = +25 °C

Mechanics/electronics
	Supply voltage:	10 V DC ... 30 V DC ¹⁾
	Residual ripple:	≤ 5 Vpp ²⁾
	Power consumption:	≤ 20 mA ³⁾
	Output type:	NPN
	Switching mode:	Light switching
	Output current Imax.:	< 50 mA
	Response time:	< 0.6 ms ⁴⁾
	Switching frequency:	800 Hz ⁵⁾
	Connection type:	Cable, 3-wire, 2 m ⁶⁾
	Cable diameter:	Ø 3 mm
	Circuit protection:	A, C, D ⁷⁾ ⁸⁾ ⁹⁾
	Optics material:	PMMA
	Enclosure rating:	IP 67
	Ambient operating temperature:	-25 °C ... +50 °C
	Ambient storage temperature:	-40 °C ... +75 °C
	UL File No.:	NRKH.E181493
	Housing material:	ABS, Plastic

¹⁾ Limit values, operation in short-circuit protected network max. 8 A ²⁾ May not exceed or fall short of V_S tolerances ³⁾ Without load ⁴⁾ Signal transit time with resistive load ⁵⁾ With light/dark ratio 1:1 ⁶⁾ Do not bend below 0 °C ⁷⁾ A = V_S connections reverse-polarity protected ⁸⁾ C = interference suppression ⁹⁾ D = outputs overcurrent and short-circuit protected

1064365 GSE2S-N1311